关于质量的投稿标题英文

可以接受的，主要是看文章质量，投稿须知如下，希望有所帮助：《上海金融》投稿须知：1、欢迎来稿。字数以万字以内为宜，在稿件质量相当的情况下，篇幅短的文稿优先采用。2、论文后面要附参考文献。参考文献著录须规范。一般格式：[阿拉伯数字序号]作者姓名、文章标题[文献类型标识]、出版社、出版年月。根据GB3469规定，以单字母方式标识以下各种参考文献类型：专著[M]、论文集[C]、报纸文章[N]、期刊文章[J]、学位论文[D]、报告[R]、标准[S]、专利[P]。其中专著[M]要注明出版社所在地，报纸文章[N]要注明参考文章第几版，期刊[J]要注明参考文章所在起止页码。例如：[1]作者，文章标题[N]经济日报，2000-10-16 (8)[2]作者1，作者2．文章标题[M]北京：中国金融出版社，2002[3]作者1，作者2．文章标题[J]上海金融，2003，(6)：22-24本刊根据中文社会科学引文索引(CSSCI)来源期刊引文著录“学术论文必须具有引用文献，采用实引方式在正文中标注”的要求，提醒本刊投稿作者：论文所附参考文献须实引并在正文中标注。3、来稿请附中英文摘要、中英文关键词；同一稿件无论作者几位均须写出作者简介，内容包括：姓名、出生年月、性别、单位、职称、最高学历。4、来稿时，请写清作者的详细地址、工作单位全称、邮编、联系电话号码、以便必要时迅速取得联系；若是电子邮件投稿，请在邮件主题栏目注明文章主题词，以便于查阅。5、作者可通过电子邮箱或纸质投稿，但须专投。只通过电子邮箱投稿的，在一个月内未收到录用通知，请改投它刊；而通过纸质投稿的，如在三个月内未收到录用通知，可改投它刊，本刊不再另行通知。6、由于经费和人力所限，凡投寄本刊稿件，不论刊用与否，本刊概不退稿，作者务请自留底稿。

title: Quality

论文可以吗?第一篇:谈产品质量管理On product quality management and improvement [Abstract] modern society, the quality of mechanical products is particularly important here for the quality of products, as well as measures to improve the management of the program was [Key words] product quality management to improve the quality of I Overview And improve the quality of the sound system and maintain its effective operation of the fundamental purpose is to improve the quality of management and the quality of products, improving economic efficiency, reduce waste and maximize meet the needs of To achieve this goal, one of the main ways and means is to carry out continuous quality improvement, including its quality system and improve the product quality This article talk about the product quality control measures and Second, product quality control measures (A) customer requirements In accordance with ISO9000-2000, in the eight quality management principles, the first principle of "customer-focus of " The requirements of customers, including product features, performance requirements, the current and future needs are to be taken into To meet the requirements of customers, products will have a true sense of (B) regulations Product development and manufacturing, first of all, it should be noted that the "safety" It is to protect the safety of production, workers and the safety of state property security, the prevention of major accidents and In addition, countries should also pay attention to environmental protection laws and regulations on the (C) standards Product development and manufacturing must follow the national standard, the provisions of the subject by the national testing agencies authorized by the check only after the production and sale of (D) specific standard products of control Comply with the People's Republic of China Standardization Law, in the absence of a specific product or industry standards for national standards, the development of enterprises should be the The standards must be reported to local enterprises standardized administrative departments for the Standard products are product design, development, production, the basis for Product standards, taking full account of customer requirements, regulations and safety standards on the basis of the technology should also be given to the advanced nature of economic rationality and the protection of the (E) control of product design Control of product design, including design input, design output and design review, design verification, to confirm the design and design to improve ① designed to control the importation, which is based on standard products based on the formation of the Design is the importation of products that meet customers, laws and regulations required by the root, it should review the design input, and there is a written Design and Design ② output control assessment, design output is the product of design Design of output assessment should be carried Assessment of its compliance with the standards, advanced technology, economy, technology and Accreditation should have a written Design output should be approved before ③ design verification control products in the formation of the appropriate phase of the implementation of the verification to prove that the input and design ④ confirmed that the design control, to verify the records and running to prove that the product is expected to meet the ⑤ sent to the national mandate for the inspection agency ⑥ to change the design of control, either from outside or within the requirements changes should be authorized to carry out the assessment and approval before the implementation of (F) raw materials, quality control ① suppliers selected by the Ministry of Technology, Engineering, procurement department, QC 4 responsible for the supply of test makers, the assessment confirmed that ② suppliers must have a quality assurance system, supply capacity, to deal with complaints and service capabilities in order to be included in the assessment of ③ through the assessment of the use of qualified suppliers to send samples, a small number of trial, low-volume trial, the bulk of the trial all qualified and have the capacity to supply over the conditions of manufacturers in order to be included in the procurement unit ④ raw materials into the plant QC must be in strict accordance with the procurement of raw materials and a list of technical standards for testing and inspection records storage in order to eliminate sub-standard storage of raw materials, into the production ⑤ raw materials to achieve reasonable, in the right place, clearly Compliance with the principle of FIFO, to prevent the stock too long and ⑥ ensure a well-ventilated warehouse, and at any time to monitor the storage temperature and humidity control, and so (Vii) the production process of quality control ① control document processing technology, where the technology is right or not affect the quality of the product should be formulated to guide the operation of the Workers should be able to access the ② control officers, who devoted a special process to be involved in the operation, the operator should be trained by the successful test, post card holders post Equipment control ③ equipment, production enterprises in the manufacturing process, equipment plays a huge role, is related to product quality control and management of the Management control of the good or bad is directly related to product quality and improving the Production of all equipment used in the need for strict control device to control the use of the main points is a reasonable, well-maintained, regular inspection, maintenance time and, if necessary, and should adjust its determination of mechanical ability, so that the mechanical ability to be able to meet the quality of the ④ control over the quality of work, quality of work is good or bad, is to ensure that the key to the quality of ⑤ process control, process control, including: in line with the requirements of the processing equipment; equipped with the necessary testing and inspection equipment; strict disciplinary process, not stop the process according to the paper's operation; rigorous process between order to test and record; failure Pieces can not be order, and strictly (H) quality control ① inspection process control, strict manufacturing processes to each of the inspection process, and to make records, logo and, if necessary, can be traced ② control product testing, product development patterns should be Test type of qualified products, in the form of the life test, not an exceptional circumstance, only to test ③ control of the factory test (C8), the factory inspection must be carried out after the completion of the inspection Factory inspection can be successful accounting, Those who fail tests should be quarantined To accept concessions, the customer should be signed and to inform the relevant (I) storage products quality control Storage products to ensure good ventilation, temperature and humidity control to Neatly stacked Storage products in strict accordance with the principle of FIFO, put an end to long storage time, the impact on the quality of Product packaging must comply with the requirements of Third, improve the quality of management (A) clear objectives and requirements To the relevant departments and personnel are involved in the process of improving the quality of preparation, we should first determine the quality improvement projects and goals, identify activities to improve the quality of the background and analysis of the current situation and the possibility to achieve in order to clear their needs, scope and , Before the implementation of quality As a result, on the need to improve the quality of the products for For example, a product from design shape after the second groups have produced in the production process more quality, product reliability is not high level, and long production After the delivery of users, more user responses, mainly in the stability of the product for shorter working hours, that is, the low level of reliability (MTBF only a few dozen hours) In less than a year, three times in a row to send dozens of technicians for on-site technical services to users and equipment maintenance, economic losses are To this end, the leadership of the unit, with the support of departments in the quality of technology, production and other departments concerned, the user response on the product quality and production problems that exist and the emergence of serious quality problems, identify the main problems and reasons, A clear improvement projects, and part of the goal and (B) the development of plans and measures to improve According to the need to improve the project, location and the objectives and requirements of the development of plans and measures to improve and implement, the deadline to If (1) by the head of product re-establishment of "quality assurance framework", further defined the production process and quality control Stresses on the use of local components of the sophisticated screening; Denso Denso to strictly enforce quality control procedures; debugger to debug the implementation of strict quality control procedures, and must do a good job in the process of debugging records; End debugging stand-alone machine to submit joint trial before the Environmental Stress Screening, and so (2) to improve the development of the project to improve the implementation of the program and organize experts to carry out the assessment on the implementation of the program, the assessment can be after the passage of the implementation of the (3) manufacturing process technology strict discipline to further strengthen the management and control In the manufacturing sector to carry out the quality of competition Denso, Denso million welding points, error-free competition and ensure the quality of Denso (4) because of some quality problems due to improper use caused, in product improvement should be based on the user's situation to strengthen the operation of the user's use of technical In the delivery of the product users, for users to operate the use of technical training, focusing on product features, principles, methods of operation in order to reduce the use of improper operation caused by quality (C) of the plans and measures to improve the supervision and inspection In order to improve the planning and implementation of effective measures, the quality of the sector should be strengthened to monitor the quality of the production process and quality inspection, according to the improvement plan, targeted to do a good job in improving the quality of the process and the implementation of the measures of supervision and (D) the results of treatment Quality inspection departments will be timely feedback to the production sector, work on improving the process of debugging or inadequate measures, the inspection process, the quality of the sector in the production sector organizations, such as technicians for analysis to determine whether they are "common" failure , And if so, to improve the development of plans and programs continue to

Would rather not prior inspection after reworkOne hundred people busy everyone careful oversight more smoothlyMake products packaging job security products final qualityUndertake the responsibility to solve the problems of the safety is life, violate the source of an accident

inquiry about the quality of the product

PRODUCT QUALITY ISSUE